CHINESEpapercutMy purchases

Animals / PAPER CUTTING TEMPLATE

Floral Horse

A full, upright floral horse design adapted from the interactive studio. Follow its folding notes to prepare the paper and finish the details.

Difficulty
Advanced
Estimated time
90–180 minutes
Paper size
A4 / US Letter
Method
Fold the frame; carve flat

You'll need Thin paper, Printer, Scissors, Craft knife and cutting mat for enclosed details

Download printable PDF Download SVG vector

For vector editing or cutter software. Machine settings and compatibility have not been tested.

Template use: Site download policy: personal printing, classroom photocopying, and sharing the PDF/SVG files are allowed for non-commercial use. Commercial use is not allowed.

Save to Pinterest
Share this template

Know what stays. Know what goes.

The printable shows the full, upright design. Check the folding notes below before choosing how to prepare the sheet.

KEEPBlack shapes
REMOVEWhite openings and the white outside area

Preserve narrow connections between shapes. Loose shapes need a backing sheet or separate placement; the drawing has not been physically tested for connectivity.

From one A4 sheet to your paper cut

Fold the frame; carve flat

Use a center fold for the decorative outer frame only. The picture inside is asymmetric and must be cut after unfolding.

Start with a complete, uncut sheet. Each picture shows the paper before that step; red dashes mark only the next cuts. Keep the surrounding paper until the outside-cutting step.

Red: next cutBlue: fold, never cutGray: transfer guide · tan: paper · white: removed

1. Start with a full A4 sheet

Floral Horse — 210 x 297 mm · nothing has been cut
210 x 297 mm · nothing has been cut · View larger

Take one blank A4 sheet (210 x 297 mm), preferably thin colored paper. Print PDF page 1 separately at 100% and check its 50 mm line. Center the pattern on your blank sheet; do not cut off the surrounding paper yet.

2. Fold and mark the frame

Floral Horse — Folded A4 rectangle · no cuts yet
Folded A4 rectangle · no cuts yet · View larger

Fold the A4 sheet lengthwise with the closed crease on your left. Transfer only the right half of the outer frame from the full-size guide. Leave the animal, lettering and flowers unmarked for now: they must not be mirrored.

3. Cut the outer frame only

Floral Horse — Red dashes: outside cut · leave the center solid
Red dashes: outside cut · leave the center solid · View larger

Begin at the loose outside edge of the folded rectangle and approach the red frame outline through waste paper. Cut this outside boundary through both layers. Leave the whole center solid and the connections across the crease intact.

4. Open, then cut the details

Floral Horse — Opened paper is still solid · red marks the next openings
Opened paper is still solid · red marks the next openings · View larger

Unfold and flatten the frame. Align and trace the complete original drawing in its correct direction. Now cut the small border openings and flower details, then the white areas around the horse, one layer at a time on a cutting mat. Follow the red interior boundaries and preserve the medallion frame and the horse-to-frame connections.

5. Lift and refine

Floral Horse — Finished result · no new cut lines
Finished result · no new cut lines · View larger

Gently release the cut design from the surrounding offcuts. Lay it flat and trim only attached scraps or uneven edges. Preserve the medallion frame and the horse-to-frame connections. A finished opening does not need to be cut again.

Do not cut the animal, bird, fish or flowers through folded layers. Follow the full-size upright reference after opening the frame.

PDF page 1 is the clean full-size pattern; pages 2–3 show this complete sequence. A4 is the default; the Letter download uses a Letter sheet. Try a scrap first to check fragile bridges.

Print, prepare, and make

Match the PDF to your paper size and check the 50 mm scale line. Keep the pattern-specific folding sequence above beside you as you work.

Printing a paper cutting template · From download to finished paper cut · Printing and cutting troubleshooting

Paper and tools

Try the paper and tools on a scrap first. Difficulty and time are planning estimates; complete a trial before preparing a group activity.

Paper cutting tools and materials

Making the floral horse paper cutting

The floral horse stands inside an angular ornamental frame, with small flower openings across its body. The site's horse motif story connects the animal with progress and success. You might choose this design for someone beginning a course, changing work, or setting out on a journey, with a note explaining your own wish rather than promising a particular outcome.

Look closely at the legs, mane, and tail before cutting. The narrow connections between the animal and its border need support, and the long openings around the tail leave thin strips of paper. Keep the surrounding sheet in place while following the illustrated sequence; do not lift the horse by a leg or pull a loose scrap through the mane.

The frame can use a center fold, but the horse itself is asymmetric. Open the sheet before working on that inner picture. A contrasting backing helps the flower openings remain readable; test the final print size before choosing paper for a gift.

About this template

A full, upright floral horse design adapted from the interactive studio. Follow its folding notes to prepare the paper and finish the details. The PDF is a cutting study; the SVG contains editable vector outlines.

Meaning of the motif

Progress & success · Floral Horse

Read the cultural context and sources for the recognizable motif. Its use can vary by occasion and tradition.

Your paper studioOpen in a new tab